Introduction to the Ideal Gas Equation Revision Notes | A Level AQA Chemistry
The ideal gas equation is pV = nRT, with p in Pa, V in m³, n in moles, R = 8.314 J mol⁻¹ K⁻¹ and T in kelvin. Free AQA notes and 15 questions answered.
Updated 5 Sept 2026 · Revise Right Team
Introduction to the Ideal Gas Equation is part of Amount of substance in A Level AQA Chemistry.
6 min
Reading time
68
Lessons in this topic
A Level AQA
Pathway
Reviewed by Revise Right
Content review
What this lesson covers
The ideal gas equation is pV = nRT, with p in Pa, V in m³, n in moles, R = 8.314 J mol⁻¹ K⁻¹ and T in kelvin. Free AQA notes and 15 questions answered.
State the ideal gas equation $pV = nRT$ and identify each variable with its correct SI unit
Rearrange and apply $pV = nRT$ to calculate pressure, volume, temperature, or amount of substance
Convert between non-SI units and SI units before substituting into $pV = nRT$
Explain the physical meaning of each variable in the ideal gas equation
Revise Right Mocks '26
AQA A-Level Chemistry mock draft, 26–31 Oct. Draft coverage: Chemistry 7405/1 · Paper 1. Reviewed for an original-practice sitting; check student availability before registering. Marking and results will follow later, after separate approval. Eligible new accounts receive a five-day Pro trial when signup email verification completes. Previous trials keep their original expiry. After expiry, new papers need Pro unless you have an explicitly confirmed free sitting offer for this event. That offer adds no Pro time or AI learning. Saved attempts and released results remain readable. No card or automatic charge.
Use this lesson to stay inside Amount of substance while connecting the detail back to the wider Physical chemistry topic.
Ideal gas equation: Mathematical relationship $pV = nRT$ that describes the behaviour of an ideal gas, where pressure, volume, amount of substance, and temperature are related through the gas constant $R$. Used when calculating any one of these four quantities given the other three.
Gas constant (R): Universal proportionality constant in the ideal gas equation with the value $8.314$ J mol$^{-1}$ K$^{-1}$. Always provided on the AQA data sheet; students are not required to recall its value.
Amount of substance (n): The number of moles of gas present, measured in mol. Calculated from mass and molar mass, or from the ideal gas equation itself.
Absolute temperature (T): Temperature measured on the Kelvin scale, where $T(\text{K}) = T(^\circ\text{C}) + 273$. Must always be in Kelvin when substituting into $pV = nRT$.
Revision notes
Read the core explanations from Introduction to the Ideal Gas Equation before testing yourself from memory.
1. Why One Equation Describes Every Gas
Picture a sealed syringe of air. Push the plunger in, and the pressure rises. Heat it up, and the pressure rises again. Add more gas, and the pressure rises once more. Three completely different actions, yet they all change the same measurable quantity.
Chemists noticed that pressure, volume, temperature, and amount of gas are not independent — they are locked together by a single relationship. That relationship is the ideal gas equation: $pV = nRT$. Master this one equation and you can calculate any of those four quantities from the other three.
2. The Ideal Gas Equation and Its Variables
Each variable has one correct SI unit, and using the wrong unit is the single most common source of lost marks in this topic. The table below fixes those units in your memory before you touch a single calculation.
Variable
Symbol
SI Unit
Common Non-SI Form (Convert First)
Pressure
$p$
Pascal (Pa)
kPa — multiply by 1000; atm — multiply by 101 325
Volume
$V$
Cubic metre (m$^3$)
cm$^3$ — divide by 10$^6$; dm$^3$ — divide by 1000
Amount
$n$
Mole (mol)
Usually already in mol; calculate from mass/M$_r$ if needed
Gas constant
$R$
J mol$^{-1}$ K$^{-1}$
Always 8.314 — given on the data sheet
Temperature
$T$
Kelvin (K)
$^\circ$C — add 273
The word 'ideal' carries a specific physical meaning here. An ideal gas has particles with no volume and no attraction or repulsion between them. Real gases deviate from this model when pressure is very high (particles are forced close together, so their own volume matters) or when temperature is very low (particles move slowly enough for intermolecular forces to become significant).
3. Unit Conversions: The Non-Negotiable First Step
AQA exam questions almost always give data in non-SI units — pressure in kPa, volume in cm$^3$ or dm$^3$, temperature in $^\circ$C. Your first job before writing $pV = nRT$ is to convert every value into SI units. Skipping this step and substituting directly is the most reliable way to get the wrong answer.
Temperature: $T(\text{K}) = T(^\circ\text{C}) + 273$ — for example, $25^\circ\text{C} = 298\text{ K}$
Pressure: $1\text{ kPa} = 1000\text{ Pa}$, so multiply kPa by 1000 to get Pa
Volume: $1\text{ dm}^3 = 1 \times 10^{-3}\text{ m}^3$, so divide dm$^3$ by 1000 to get m$^3$
Volume: $1\text{ cm}^3 = 1 \times 10^{-6}\text{ m}^3$, so divide cm$^3$ by $10^6$ to get m$^3$
Notice that the gas constant $R = 8.314$ J mol$^{-1}$ K$^{-1}$ is defined using SI units throughout. If you feed it SI values for $p$, $V$, and $T$, the units cancel correctly and you get $n$ in mol. Feed it kPa or cm$^3$ and the units do not cancel — the number you get is meaningless.
4. Rearranging and Applying the Equation
Because $pV = nRT$ is a simple product on both sides, rearranging for any variable is straightforward. Divide both sides by whatever surrounds the unknown, and you have your working formula.
The worked examples below show the full method for two common question types. Work through each step yourself before revealing the next — this is where the real learning happens.
Worked example: Calculating the Amount of Substance from $pV = nRT$
A sealed container holds a gas at a pressure of 150 kPa and a temperature of 27 $^\circ$C. The volume of the container is 2.00 dm$^3$. Calculate the amount, in mol, of gas present. ($R = 8.314$ J mol$^{-1}$ K$^{-1}$)
$p = 150 \times 10^3 = 1.50 \times 10^5 \text{ Pa}$
$V = 2.00 \div 1000 = 2.00 \times 10^{-3} \text{ m}^3$
$T = 27 + 273 = 300 \text{ K}$ — Every value must be in SI units before substitution. Pressure: multiply kPa by 1000. Volume: divide dm$^3$ by 1000. Temperature: add 273.
$n = \dfrac{pV}{RT}$ — Divide both sides of $pV = nRT$ by $RT$ to isolate $n$.
$n = \dfrac{(1.50 \times 10^5) \times (2.00 \times 10^{-3})}{8.314 \times 300}$ — Each value carries its SI unit. The units will cancel to give mol.
$n = \dfrac{300}{2494.2} = 0.1202...\approx 0.120 \text{ mol}$ — Round to 3 significant figures to match the data given. Always state the unit.
Answer: $n = 0.120$ mol (3 s.f.)
Worked example: Calculating the Pressure of a Gas from $pV = nRT$
0.250 mol of nitrogen gas occupies a volume of 5.00 dm$^3$ at a temperature of 100 $^\circ$C. Calculate the pressure of the gas in Pa. ($R = 8.314$ J mol$^{-1}$ K$^{-1}$)
$n = 0.250 \text{ mol}$ (already in mol)
$V = 5.00 \div 1000 = 5.00 \times 10^{-3} \text{ m}^3$
$T = 100 + 273 = 373 \text{ K}$ — Volume in dm$^3$ must be divided by 1000 to give m$^3$. Temperature in $^\circ$C must have 273 added to give K.
$p = \dfrac{nRT}{V}$ — Divide both sides of $pV = nRT$ by $V$.
$p = \dfrac{0.250 \times 8.314 \times 373}{5.00 \times 10^{-3}}$ — All values are now in SI units, so the answer will be in Pa.
$0.250 \times 8.314 = 2.0785$
$2.0785 \times 373 = 775.28...$ — Work left to right: $0.250 \times 8.314$ first, then multiply by 373. Keeping extra figures avoids rounding errors mid-calculation.
$p = \dfrac{775.28}{5.00 \times 10^{-3}} = 775.28 \times \dfrac{1}{5.00 \times 10^{-3}} = 775.28 \times 200 = 155056 \approx 1.55 \times 10^5 \text{ Pa}$ — Dividing by $5.00 \times 10^{-3}$ is the same as multiplying by 200. The answer is in Pa because all inputs were SI.
Answer: $p = 1.55 \times 10^5$ Pa (3 s.f.)
5. Linking the Ideal Gas Equation to Molar Mass
One powerful extension of $pV = nRT$ is finding the molar mass of an unknown gas. Because $n = m \div M$ (where $m$ is mass in grams and $M$ is molar mass in g mol$^{-1}$), you can substitute this into the ideal gas equation to get $pV = \dfrac{m}{M}RT$, then rearrange for $M$.
This approach appears in AQA questions where you are given the mass of a gas sample along with its pressure, volume, and temperature. The method is a direct application of the same equation — the only extra step is expressing $n$ in terms of mass and molar mass before rearranging.
Worked example: Finding Molar Mass Using $pV = nRT$
A 0.800 g sample of a volatile liquid is vaporised and found to occupy 312 cm$^3$ at a pressure of 101 kPa and a temperature of 100 $^\circ$C. Calculate the molar mass of the compound. ($R = 8.314$ J mol$^{-1}$ K$^{-1}$)
$p = 101 \times 10^3 = 1.01 \times 10^5 \text{ Pa}$
$V = 312 \div 10^6 = 3.12 \times 10^{-4} \text{ m}^3$
$T = 100 + 273 = 373 \text{ K}$ — Volume is in cm$^3$: divide by $10^6$ to convert to m$^3$. Temperature: add 273.
$n = \dfrac{pV}{RT} = \dfrac{(1.01 \times 10^5) \times (3.12 \times 10^{-4})}{8.314 \times 373}$ — Calculate the number of moles first, then use it to find molar mass.
$1.01 \times 10^5 \times 3.12 \times 10^{-4} = 1.01 \times 3.12 \times 10^{5-4} = 3.1512 \times 10^1 = 31.512$ — $10^5 \times 10^{-4} = 10^{5+(-4)} = 10^1 = 10$. Then $1.01 \times 3.12 = 3.1512$, so the product is $31.512$.
$n = \dfrac{31.512}{3101.122} = 0.010161...\text{ mol}$ — Keep extra significant figures here to avoid rounding errors in the next step.
$M = \dfrac{m}{n} = \dfrac{0.800}{0.010161} = 78.7...\approx 78.7 \text{ g mol}^{-1}$ — Molar mass = mass $\div$ moles. The answer is close to 78 g mol$^{-1}$, consistent with benzene ($\text{C}_6\text{H}_6$, $M_r = 78$).
Answer: $M \approx 78.7$ g mol$^{-1}$ (3 s.f.)
6. Ideal vs Real Gas Behaviour
The ideal gas equation works remarkably well for most gases under everyday conditions, but it rests on two assumptions that break down at extremes: that gas particles have no volume of their own, and that there are no intermolecular forces between them.
At high pressures, particles are compressed close together. Their own physical volume becomes a significant fraction of the total container volume, so the gas occupies more space than the ideal equation predicts. At low temperatures, particles move slowly and intermolecular attractions pull them together, reducing the pressure below the ideal prediction.
Condition
Assumption that fails
Effect on real gas compared to ideal
High pressure
Particles have negligible volume
Real gas occupies more volume than predicted
Low temperature
No intermolecular forces
Real gas exerts less pressure than predicted
Low pressure, high temperature
Both assumptions approximately valid
Real gas behaves close to ideally
7. Exam Technique and Common Mistakes
AQA mark schemes for ideal gas equation questions award marks at three distinct stages: the correct rearrangement, the correct substitution with SI units, and the correct final answer with units. Losing a mark at the substitution stage — because a temperature was left in $^\circ$C or a volume was left in cm$^3$ — is avoidable with a disciplined conversion step before every calculation.
When a question asks you to 'calculate', show every step of your working. Even if your final answer is wrong due to an arithmetic slip, you can still earn method marks for a correct rearrangement and a correct substitution. A bare answer with no working scores nothing if it is incorrect.
That question captures the most conceptually demanding trap in this topic: the difference between a Celsius ratio and a Kelvin ratio. Celsius is an arbitrary scale with its zero at the freezing point of water; Kelvin starts at absolute zero, where particle motion theoretically ceases. Only Kelvin ratios are physically meaningful in the ideal gas equation.
Every calculation in this topic reduces to the same disciplined sequence: convert to SI units, identify the unknown, rearrange $pV = nRT$, substitute, and state the answer with its unit. Practise that sequence until it is automatic, and the ideal gas equation becomes one of the most reliable sources of marks in the Physical Chemistry paper.
Sources and content standards
Published by Revise Right. Use the official specification reference to check the requirements for your course. Content updated: 2026-09-05.
The ideal gas equation is pV = nRT, where p is pressure in pascals (Pa), V is volume in cubic metres (m³), n is the amount in moles, R is the gas constant, 8.314 J mol⁻¹ K⁻¹, and T is temperature in kelvin (K). Knowing any three of p, V, n and T gives the fourth.
What units do you use in pV = nRT?
Before using pV = nRT, convert to SI units: add 273 to a temperature in °C to get K, multiply kPa by 1000 to get Pa, divide dm³ by 1000 to get m³, and divide cm³ by 10⁶ to get m³. R = 8.314 J mol⁻¹ K⁻¹ is defined in SI units, so other units give a meaningless answer.
What is the value of the gas constant R?
The gas constant R is 8.314 J mol⁻¹ K⁻¹, and it is given on the data sheet. It is defined using SI units throughout, so pressure, volume and temperature must all be in SI units for the units to cancel correctly.
How do you convert dm³ to m³?
To convert dm³ to m³, divide by 1000, because 1 dm³ = 1 × 10⁻³ m³. A volume in cm³ is divided by 10⁶ instead, because 1 cm³ = 1 × 10⁻⁶ m³. Volume must be in m³ for pV = nRT.
How do you convert kPa to Pa?
To convert kPa to Pa, multiply by 1000, so 150 kPa = 1.50 × 10⁵ Pa. Pressure must be in pascals before substituting into pV = nRT, and 1 atm = 101 325 Pa.
How do you calculate moles using the ideal gas equation?
Convert to SI units, then use n = pV ÷ RT. For a gas at 150 kPa, 27 °C and 2.00 dm³: p = 1.50 × 10⁵ Pa, V = 2.00 × 10⁻³ m³ and T = 300 K, so n = (1.50 × 10⁵ × 2.00 × 10⁻³) ÷ (8.314 × 300) = 300 ÷ 2494.2 = 0.120 mol.
How do you find molar mass using the ideal gas equation?
Use pV = nRT to find the amount n, then molar mass M = mass ÷ n. A 0.800 g sample occupying 312 cm³ at 101 kPa and 100 °C gives n = 0.010161 mol, so M = 0.800 ÷ 0.010161 ≈ 78.7 g mol⁻¹, consistent with benzene.
When do real gases not behave ideally?
Real gases deviate from ideal behaviour at high pressure, where particles are forced close together so their own volume becomes significant, and at low temperature, where slow particles are pulled together by intermolecular forces, reducing the pressure. They behave most ideally at low pressure and high temperature.
How do you convert Celsius to Kelvin?
To convert Celsius to Kelvin, add 273, so 25 °C = 298 K and 100 °C = 373 K. Kelvin starts at absolute zero, where particle motion theoretically ceases, which is why only Kelvin temperatures work in pV = nRT.
What is an ideal gas?
An ideal gas is a theoretical gas whose particles have negligible volume and experience no intermolecular forces. Real gases approximate ideal behaviour at low pressures and high temperatures; helium at room temperature and atmospheric pressure behaves very close to ideally.
How do you calculate the pressure of a gas using pV = nRT?
Pressure is found from p = nRT ÷ V. For 0.250 mol of nitrogen in 5.00 dm³ at 100 °C, with V = 5.00 × 10⁻³ m³ and T = 373 K, p = 0.250 × 8.314 × 373 ÷ 5.00 × 10⁻³ = 1.55 × 10⁵ Pa.
Why must temperature be in Kelvin in the ideal gas equation?
Temperature must be in Kelvin because Kelvin starts at absolute zero, while Celsius is an arbitrary scale with its zero at the freezing point of water. Only Kelvin ratios are physically meaningful in the ideal gas equation.
Why do real gases deviate from ideal behaviour at high pressure?
At high pressure, particles are compressed close together, so their own volume becomes a significant fraction of the container volume. The assumption of negligible particle volume fails, and the real gas occupies more volume than the ideal equation predicts.
Why do real gases deviate from ideal behaviour at low temperature?
At low temperature, particles move slowly enough for intermolecular attractions to pull them together. The assumption of no intermolecular forces fails, so the real gas exerts less pressure than the ideal equation predicts.
How do you rearrange pV = nRT?
pV = nRT is rearranged by dividing both sides by whatever surrounds the unknown: n = pV ÷ RT, p = nRT ÷ V, V = nRT ÷ p and T = pV ÷ nR. The answer is given in the SI unit for that variable.